Government Procurement – The Ultimate Guide for 2022

Have you ever wondered how government procurement works? Those who are well versed or are working in the procurement industry already know what government procurement is. But there are also those who do not have the slightest idea as to how government procurement works or how it actually starts!

For this article, we are going to have a look at how government procurement works. We’re going to talk about where it starts, how the whole process looks like, and how the finishing touches of the process end. 

After reading this article, you should already have an inkling of how to proceed with government procurement.

Government Procurement – Where it all Starts?

Like most procurement processes, government procurement starts when a branch or person of authority in the government has a need for materials or services. These materials/services are required to help the government continue its daily task of governing a country or city. It could also be that a certain department in a government or state has a need of materials to rebuild a city that is devastated by war or a natural disaster. Or perhaps, new construction materials are needed for the city to continue its construction on key city developments, such as roads, public buildings, parks, and others.

Once there is a need for the purchase of materials and/or service, a request for proposal is asked. We’ve already talked about RFPs in the past, but for everyone’s benefit, RFP means Request for Proposal. It is basically an official document that shows the government agency or person of authority’s official declaration that they are going to buy supplies or services. The request for proposal often has the list of supplies/services needed, the amount or type needed, and when it is due. 

Potential suppliers then receive the RFPs. The supplier, in turn, writes back to inform the government department or person in authority with answers regarding the RFP. The supplier can even give some samples too for the procurement in charge to check. If the government department or person of authority is satisfied with the response, the potential suppliers are then given invites for bidding.

Editor's note:

Hi there! My name is Marijn Overvest, I'm the founder of Procurement Tactics.
Want to take your negotiation results to the next level?

Government Procurement vs Public Procurement

If one were to analyze the process, public procurement and government procurements are one and the same. Or rather, government agencies use public procurement in order to give other shareholders a decent chance on fulfilling orders asked by the government or a local department or authority.

One good reason why government procurement is styled in a public manner is to avoid corruption in government ranks. It is very easy for government officials to influence the outcome of any procurement process in their favor. Thus, you hear stories of relatives and friends of public officials getting high valued procurement contracts for big government projects, such as infrastructure projects.

Public Procurement, Procurement Tactics Style

For those who managed to take our amazing Negotiation Gamechanger Course, you guys already know that we at Procurement Tactics have created our very own procurement process.

It’s easy, it’s quick, and it’s perfect for public procurement. In fact, it’s perfect for all types of procurement processes. It’s a process perfected through hours of research, training, and actual procurement managers who used it for years.

For those who are very excited about how it works, here’s how you can do public procurement, Procurement Tactics style:


So before a procurement manager starts procuring supplies, there must first be a need for the said supply. Therefore, it’s the procurement manager’s responsibility to recognize the need for supplies and to develop market research for the said supply.

Market research will help the procurement manager come up with the exact number or amount for the needed supplies.

For example, an IT company has around 40 people coming in as new hires and there are only 20 computers for use. The procurement manager’s market research must have data and research that will help him/her in convincing the company in buying additional computers for their growing company. 

Some of the questions that a procurement manager should ask during market research should be the following:

  • Does the company have a current supplier?
  • Does the company have an alternate supplier in case the original supplier is gone?
  • Does the company have an ample budget for procurement?
  • Is there a shortage of the material that the company is trying to procure?
  • If yes, will this affect our company’s budget allocation for the procurement?
  • Is there an alternative if the supply needed is not available?

The market research should also cover sourcing for new available suppliers. Depending on the company or not, sourcing specialists can help the procurement manager in identifying new sources of supplies. 

Finally, the market research helps in identifying key information needed for the next two processes. Information such as pricing per supply and brand quality is important and should be included in the research.


The second step involves asking for information not just from suppliers, but from the heads of the department or branch that need the supplies. 

Because before you create a purchasing order, you will need to come up with the exact number of supplies needed. Information such as the number of available supplies and the pricing per supply are just some that you can ask when making the request. 

This is why market research is the first step of our procurement process since it will help you identify key information about the supplies you need. 

Once the procurement manager has enough data, a purchase request is then sent to higher management for budget approval. This is where company management will then decide how much budget is given to the procurement manager, based on data that was given by the initial market research.

The RFI can be considered a part of the process where you ask for more information from the branch managers, sourcing specialists, and others involved.


The request for quotation is the part of the procurement process where you ask suppliers for their initial pricing for the supplies needed. Usually done by letter, the procurement manager sends the request while the supplier responds by giving the initial price for the supplies.

Once a reply from the RFQ or request for quotation is received from the supplier, the procurement manager should hold a meeting to discuss the quotes given. A detailed analysis for each pricing is considered while the initial market research will give the procurement manager an idea of how much each supply is priced at a market level.

The information from the market research, once again, is invaluable because it will give the procurement manager an edge when proceeding towards the next procurement process.


Perhaps the most challenging yet exciting phase during the procurement process, the negotiation phase is where the procurement manager tries to get or procure the supplies either at a reasonable price or amount. 

Negotiations can also extend towards the procurement manager offering concessions towards the supplier in the hopes of doing more business in the future.

The negotiation phase is also the event where the skills of a professional procurement manager may shine; once successful, this means he/she has proved his/her mettle as a master negotiator! 

During the negotiation phase, always make sure to be ready with the information you gathered during the market research phase.


The final step of the procurement process, the contracting phase is where the procurement manager takes care of all contracts, invoices, receipts, and documents that were signed and are needed during, before, and after the entire procurement process.

Most companies employ the use of procurement software to keep all important data and documents stored digitally. For more traditional companies, the procurement manager has to keep track of all receipts and must store them for future reference.

The contracting phase is also important because if there is a need to procure more supplies from the same supplier, all contracts, documents, and receipts can be used for market research once more.

The Five Major Categories of Government Contracting

Once a supplier returns the RFP, provided the answers they submitted satisfied the procurement manager, they’ll receive a request to attend the bidding. The bidding is done to determine which supplier is able to finish the project requested and is also able to satisfy the demands placed in the RFP. 

When a supplier wins the bidding, a contract is then formed between the winning supplier and the procurement manager. For business transactions, the contract is often simple; the demands are placed and both the supplier and the sourcing team should follow everything that is placed in the contract. But for government procurement, it’s a whole different process. Government contracting is often divided into five major categories:

1. Fixed Priced Contracts

This is a contract where the pricing of the supplies will not change. However, there are also times when the ceiling or target price are both used. Fixed-price contracts often put the risk on the contract, since government contracts are not based on the amount of time or resources spent.

2. Cost-Reimbursement Contracts

For cost-reimbursement contracts, the arrangement places more risk on the government agency. These government contracts are more likely used for research and development services rather than for actual goods.

3. Time and Materials Contracts

For these contracts, the government establishes a per-hour labor rate, assesses materials costs, and establishes a price ceiling. If you can provide the services within the budget, this is a fantastic option.

Contracts for emergency services, for example, are frequently quite short-term. The contractor will only deliver labor and not materials in some situations, known as labor-hour contracts.

4. Incentive Contracts

Incentive contracts are based on either a cost-reimbursement contract or a fixed-price contract with added incentives. These will be used to create an incentive contract. 

Governments are actually concerned with suppliers or contractors who can easily complete a project in a limited amount of time. Because government projects require speedy completion, contracts are often awarded to those who are known to complete a project as fast as they can.

5. Indefinite Delivery and Quantity Contracts

A government agency may not always know exactly what they require. For example, they may not be aware of the exact quantities of material they require or the length of time they require a contractor to offer a service.

These are the most adaptable government contracts. They’re given out when the government isn’t sure how much of an item or service they’ll need or when they’ll need it. They’re also known as Task Order Contracts or Delivery Order Contracts.


Q: What is government procurement?

A: Government procurement is a procurement process where local authorities procure goods/services to improve government facilities.

Q: Why is government procurement important?

A: Some of the services/products are needed for the local government to function properly.

"Very useful course, many actionable strategies"

Want to close better deals? Prepare faster and achieve deal results you have been dreaming of?   This course is a perfect fit for ambitious procurement & sourcing professionals. Enroll  now and equip yourself with the full range of skills needed to master the deal.